Activación Software VW Immo Tool OBD para Multi Tool UHDS.

This function allows encoding keys, adaptations drivers and meter. We need a for coding the PIN and COMPONENT SECURITY. These data can be read using Option 1. X-Can, or by using third-party tools.
Approximately 80% of keys can be programmed by the ignition . This applies to meter VDO by Continental. The other models meter Johnson Control and Magneti Marelli will need our tools programmer Key Maker or another manufacturer.

The program does not support systems HANDS FREE.

Supported models:

• Immo 3, and motor controllers working in the system Immo 3.
• Immo 4 and motor controllers working in the system Immo 4.

Examples cars in which we can program the keys:
Passat B6, B7 Passat, Golf 5, Golf 6, Touran ....

In immo 3 eg. The Passat B6 if we have one key, you must use the TANGO tool to read the seventh byte for programming the key.
Examples of use: read the User Manual which is found in the programme X-Can NEWS / User manual / X-Can. 

Added option EZS Audi A6/Q7 (2005...2010)

• Read CS (if we have keys to car)
• Read EEprom OBD (if we have CS+PIN)
• Write EEprom OBD (if we have CS+PIN)
• Learn Keys OBD (Dealer Key or prepared key with EEprom) OBD
• Change Immo Data (VIN,PIN,CS,etc) OBD
• Decode all Immo Data (VIN,PIN,CS,etc) from dump
• Learn EZS with ECU OBD